Guides to choosing industrial water treatment · Page 8
Find answers on selection, costs and operation: reverse osmosis, membranes, DAF flotation, solids separation and sludge dewatering.
View articlesArticles 127–144 of 170 · Newest first
Design and costs
Which soluble COD passes through ultrafiltration
A test plan to distinguish physical retention, dissolved carbon and biodegradability before selecting treatment to complement UF.
Read articleDesign and costsSDI, turbidity and TSS before reverse osmosis
Interpret inconsistent signals, define sampling points and specify RO pretreatment without converting turbidity into TSS or SDI.
Read articleMBRs and wastewater plants
Solids in biological effluent: UF options
Distinguish biomass carryover from dissolved contamination and choose between an UltraFlux™ external MBR and tertiary UF of settled effluent.
Read articleMBRs and wastewater plantsExternal or submerged MBR for industrial wastewater
Compare external and submerged MBR layouts, equipment access, integration, cleaning and total cost for industrial plant upgrades.
Read articleMBRs and wastewater plantsConverting a treatment plant to an external MBR
Integrating UltraFlux™ with an existing biological reactor or SBR: mixed liquor, biomass return, equipment access and project inputs.
Read articleNanobubbles
From dissolved oxygen to kg O₂/h: aeration balance
Distinguish DO concentration, inventory, biological demand and oxygen transfer when evaluating additional aeration capacity.
Read articleNanobubblesAir or oxygen: compare consumption and transfer
Compare air and oxygen using transferred O₂ mass, declared gas reference conditions, total power and the same water-treatment duty.
Read articleNanobubblesDAF recycle and the air-to-solids ratio
Check released air, solids loading and recycle hydraulics before attributing poor dissolved air flotation to chemical dose.
Read articleReverse osmosis and reuse
Cooling tower blowdown reuse: silica limits
A silica balance for RO treatment of cooling tower blowdown, covering recovery, pretreatment, reusable water quality and concentrate outlets.
Read articleReverse osmosis and reuseBlending RO permeate for cooling tower makeup
Species balances, blend proportion and RO flows in an illustrative cooling-tower makeup calculation.
Read articleUF and concentration
UF: distinguish fouling from integrity loss
A diagnostic sequence combining quality, permeability and integrity testing to distinguish membrane damage from hydraulic fouling.
Read articleUF and concentrationNormalising UF permeability for temperature
Reference temperature, formula and an illustrative calculation for comparing ultrafiltration permeability across operating temperatures.
Read articleUF and concentrationHigh-solids UF pilots: acceptance criteria
UF trial protocol for net flux, concentration, cleaning and both outlet destinations before sizing.
Read articleUF and concentrationFlux, TMP and crossflow velocity in UF
Evaluate production, fouling and energy in high-load crossflow UF with comparable testing.
Read articleUF and concentrationPig manure pretreatment for UF and reverse osmosis
Characterize and separate pig-slurry solids before membranes while accounting for fouling, dissolved nutrients and every outlet stream.
Read articleUF and concentrationPreconcentration: the evaporator feed balance
Equations and data for estimating evaporator feed after UF, separating water removal from energy savings and accounting for both membrane outlets.
Read articleGet a proposal for your project.
Tell us what you need to solve in your process. Start with the information you have.
We will review the application and explain the solution we can supply or the information needed to assess it.
Contactcomercial@neptunoes.comEmail water analyses, photographs and drawings to our sales address.